Component Inventory

This page provides a list of components and their maximum quantities to support your inventorying the kit as a whole. This is helpful for kits where the kit includes all parts necessary to build any particular band-specific option (there would, in such cases, likely be excess parts left over at the end of the build).

Once these quantities check out, you can sort the components out to their respective build stages.

---

Component Type	Category	Component	Qty
Capacitor	Ceramic	100 nF(0,1 uF) (104)	2
Capacitor	tantalum	10 uF (106)	3
connector	Cable	wire and alligator clips	2
connector	Jack-RA	3.5mm stereo jack - PCB mount (rt-angle)	2
connector	Jack-RA	USB-B pcb jack (rt-angle)	1
Diode	LED	red LED	1
IC	DIP-8	LM358N dual OpAmp 0-70 deg C (LM358N dual OpAmp 0-70 deg C)	1
IC	DIP-8	TC7660 charge Pump DC-DC Conv	1
IC	TO-92	LE33CZ 3.3V voltage regulator	1
Resistor	1/4W	1 k 1/4W 1% (br-blk-blk-br-br)	1
Resistor	1/4W	10 k 1/4W 1% (brn-blk-blk-red-brn)	2
Resistor	1/4W	10 ohm 1/4W 1% (br-blk-blk-gld-br)	1
Resistor	1/4W	100 k 1/4W 1% (brn-blk-blk-orng-brn)	1
Resistor	1/4W	100 ohm 1/4W 1% (br-blk-blk-blk-br)	1
Resistor	1/4W	330 1/4W 5% (ora-ora-brn-gld)	1
Switch	2P6T	2 pole six pos rotary switch	1